Centerforce Clutch » Chevrolet, Camaro

Products for:

  • (X) Make: Chevrolet
  • (X) Model: Camaro

View Universal items for: Chevrolet, Camaro


Browse Products

Sort
View
 
Items 61-120 of 160
Description: The Centerforce® DYAD® XDS (eXtreme Drive System) 10.4 Inch patented multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 700 to 1600 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Pilots, Shim, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 1600 ft/lbs of Torque
  • Weighs 55.50 lbs
  • Spring Hub Disc with Cerametallic Material
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
Item #: 415614867
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $2,187.99
Sale: $1,785.66
Save: 18%
Save: $402.33

Qty:

Description: The Centerforce® DYAD® XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 800 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywh, Hardware, Shim, Tool, Pilot Be

  • 8.75" Diameter
  • 222.3mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 750 ft/lbs of Torque
  • Sprung Hub Disc with Sintered Metallic Material
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • Simple Install
Item #: 814262842
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $2,374.99
Sale: $2,042.96
Save: 14%
Save: $332.03

Qty:

Description: LMC Series Discs are built with carbon material in puc-style facings on both sides of the disc. These discs are made for Centerforce LMC pressure plates.

INCLUDES: Disc

  • 10.400" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 10 Spline Input Shaft
  • Weighs 4.60 lbs
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Replaceable Friction Surface
  • Ball Bearing Design
Item #: LM383271
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $287.99
Sale: $247.26
Save: 14%
Save: $40.73
Qty:

Description: LMC Series Discs are built with carbon material in puc-style facings on both sides of the disc. These discs are made for Centerforce LMC pressure plates.

INCLUDES: Disc

  • 10.400" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Weighs 4.60 lbs
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Replaceable Friction Surface
  • Ball Bearing Design
Item #: LM384161
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $287.99
Sale: $247.26
Save: 14%
Save: $40.73
Qty:

Description: LMC Series Discs are built with carbon material in puc-style facings on both sides of the disc. These discs are made for Centerforce LMC pressure plates.

INCLUDES: Disc

  • 11.000" Diameter
  • 279.4mm Diameter
  • 1-1/8" x 10 Spline Input Shaft
  • Weighs 4.90 lbs
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Replaceable Friction Surface
  • Ball Bearing Design
Item #: LM383735
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $287.99
Sale: $234.64
Save: 19%
Save: $53.35
Qty:

Description: LMC Series Discs are built with carbon material in puc-style facings on both sides of the disc. These discs are made for Centerforce LMC pressure plates.

INCLUDES: Disc

  • 11.000" Diameter
  • 279.4mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Weighs 4.95 lbs
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Replaceable Friction Surface
  • Ball Bearing Design
Item #: LM384148
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $287.99
Sale: $247.26
Save: 14%
Save: $40.73
Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Pressure Plate, Disc, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 10 Spline Input Shaft
  • Holds Up To 673 ft/lbs of Torque
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
Item #: LM271675
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $999.99
Sale: $860.16
Save: 14%
Save: $139.83

Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Cover, Disc, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 673 ft/lbs of Torque
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
Item #: LM161675
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $999.99
Sale: $816.28
Save: 18%
Save: $183.71

Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Cover, Disc, Hardware, Tool

  • 11" Diameter
  • 279.4mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 725 ft/lbs of Torque
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
Item #: LM017010
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,124.99
Sale: $918.32
Save: 18%
Save: $206.67

Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Cover, Disc, Tool

  • 11" Diameter
  • 279.4mm Diameter
  • 1-1/8" x 10 Spline Input Shaft
  • Holds Up To 750 ft/lbs of Torque
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
Item #: LM735552
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $937.99
Sale: $765.26
Save: 18%
Save: $172.73

Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Cover, Disc, Tool

  • 11" Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 750 ft/lbs of Torque
  • Sprung Hub Disc with Organic/Carbon Composite Material
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
  • Replaceable Friction Surface
Item #: LM148552
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $999.99
Sale: $860.16
Save: 14%
Save: $139.83

Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Cover, Hardware

  • 11" Diameter
  • 279.4mm Diameter
  • Holds Up To 725 ft/lbs of Torque
  • Weighs 18 lbs
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
  • Replaceable Friction Surface
  • Ball Bearing Design
  • High Quality Friction
Item #: LM360010
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $874.99
Sale: $714.23
Save: 18%
Save: $160.76

Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Pressure Plate

  • 10.4" Diameter
  • 264.2mm Diameter
  • Holds Up To 673 ft/lbs of Torque
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
  • Replaceable Friction Surface
  • Ball Bearing Design
  • High Quality Friction
  • Light Pedal Effort
Item #: LM361675
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $874.99
Sale: $752.63
Save: 14%
Save: $122.36

Qty:

Description: The Centerforce ® LMC Clutch Series is machined from billet aluminum and designed for low inertia, dramatically reducing engine rotating mass.

INCLUDES: Cover

  • 11" Diameter
  • 279.4mm Diameter
  • Holds Up To 750 ft/lbs of Torque
  • SFI Spec 1.1 Approved
  • Centrifugally Assisted
  • Billet Aluminum
  • Replaceable Friction Surface
  • Ball Bearing Design
  • High Quality Friction
  • Light Pedal Effort
Item #: LM165552
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $812.99
Sale: $663.21
Save: 18%
Save: $149.78

Qty:

Description: The Centerforce® SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 925 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 925 ft/lbs of Torque
  • Weighs 44.30 lbs
  • Solid Hub Disc with Organic Material
  • 153 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • Simple Install
Item #: 412614800
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,499.99
Sale: $1,290.27
Save: 14%
Save: $209.72

Qty:

Description: The Centerforce® SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 925 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Pilots, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 925 ft/lbs of Torque
  • Weighs 44.30 lbs
  • Solid Hub Disc with Organic Material
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • Simple Install
Item #: 412614842
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,499.99
Sale: $1,290.27
Save: 14%
Save: $209.72

Qty:

Description: The Centerforce® SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 925 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Pilot, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 10 Spline Input Shaft
  • Holds Up To 925 ft/lbs of Torque
  • Weighs 44.65 lbs
  • Solid Hub Disc with Organic Material
  • 153 Tooth R.Gear, 6 Bolt Crank, and
  • Simple Install
  • Positive Drive Floater
Item #: 412714800
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,499.99
Sale: $1,290.27
Save: 14%
Save: $209.72

Qty:

Description: The Centerforce® SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 925 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Pilot, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 925 ft/lbs of Torque
  • Weighs 45.60 lbs
  • Solid Hub Disc with Organic Material
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • Simple Install
Item #: 412614820
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,499.99
Sale: $1,290.27
Save: 14%
Save: $209.72

Qty:

Description: The Centerforce® SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 925 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Pilot, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 10 Spline Input Shaft
  • Holds Up To 925 ft/lbs of Torque
  • Weighs 45.60 lbs
  • Solid Hub Disc with Organic Material
  • 168 Tooth R.Gear, 6 Bolt Crank, and
  • Simple Install
  • Positive Drive Floater
Item #: 412714820
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,499.99
Sale: $1,290.27
Save: 14%
Save: $209.72

Qty:

Description: The Centerforce® SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 925 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Pilots, Tool

  • 10.4" Diameter
  • 264.2mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 925 ft/lbs of Torque
  • Weighs 50.80 lbs
  • Solid Hub Disc with Organic Material
  • 168 Tooth R.Gear, 8 Bolt Crank, and 0 oz Counter Balance
  • Simple Install
Item #: 412614877
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,562.99
Sale: $1,344.03
Save: 14%
Save: $218.96

Qty:

Description: The Centerforce® SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 925 ft /lbs.

INCLUDES: Cover, Discs, Floater, Flywheel, Hardware, Pilots, Shim, Tool

  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 925 ft/lbs of Torque
  • Weighs 52.65 lbs
  • Solid Hub Disc with Organic Material
  • 168 Tooth R.Gear, 8 Bolt Crank, and
  • Simple Install
  • Positive Drive Floater
  • Easy Pedal
  • Precision Balanced
Item #: 412614847
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $1,499.99
Sale: $1,224.44
Save: 18%
Save: $275.55

Qty:

Description: The Centerforce® TRIAD DS (Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1100 ft/lbs.

INCLUDES: Cover, Discs, Floaters, Flywh, Hardware, Tool, Pilots

  • 8.75" Diameter
  • 222mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 900 ft/lbs of Torque
  • 168 Tooth R.Gear, 8 Bolt Crank, and
  • 8.75" Dia. For Track Use
  • Solid Hub For Light Quick Shifts.
  • Patented Multi-disc Design
Item #: 836264077
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $2,724.99
Sale: $2,224.44
Save: 18%
Save: $500.55

Qty:

Description: The Centerforce® TRIAD DS (Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1100 ft/lbs.

INCLUDES: Cover, Discs, Floaters, Flywh, Hardware, Tool, Pilots

  • 8.750" Diameter
  • 222.3mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 900 ft/lbs of Torque
  • Weighs 32.90 lbs
  • Solid Hub Disc with Sintered Metallic Material
  • 168 Tooth R.Gear, 6 Bolt Crank, and
  • 8.75" Dia. For Track Use
Item #: 836264042
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $2,724.99
Sale: $2,224.44
Save: 18%
Save: $500.55

Qty:

Description: The Centerforce® TRIAD XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1200 ft/lbs.

INCLUDES: Cover, Discs, Floaters, Flywh, Hardware, Tool, Pilots

  • 8.75" Diameter
  • 222mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 1100 ft/lbs of Torque
  • 168 Tooth R.Gear, 8 Bolt Crank, and
  • 8.75" Dia for Track Use
  • Solid Hub for Light Quick Shifts.
  • Patented Multi-Disc Design
Item #: 838264077
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $2,749.99
Sale: $2,244.85
Save: 18%
Save: $505.14

Qty:

Description: The Centerforce® TRIAD XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1200 ft/lbs.

INCLUDES: Cover, Discs, Floaters, Flywh, Hardware, Tool, Pilots

  • 8.750" Diameter
  • 222.3mm Diameter
  • 1-1/8" x 26 Spline Input Shaft
  • Holds Up To 1100 ft/lbs of Torque
  • Weighs 34.30 lbs
  • Solid Hub Disc with Sintered Metallic Material
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
Item #: 838264042
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $2,749.99
Sale: $2,244.85
Save: 18%
Save: $505.14

Qty:

Description: The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.

INCLUDES: Alignment Tool

  • 1-1/8" x 10 Spline Input Shaft
  • Tested and approved by Centerforce
  • Made In The USA!
Item #: 53010
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $8.99
Sale: $7.47
Save: 17%
Save: $1.52
Qty:

Description: The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.

INCLUDES: Alignment Tool

  • 1" x 14 Spline Input Shaft
  • Tested and approved by Centerforce
  • Made In The USA!
Item #: 53006
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $8.99
Sale: $7.47
Save: 17%
Save: $1.52
Qty:

Description: The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.

INCLUDES: Alignment Tool

  • 1-1/8" x 26 Spline Input Shaft
  • Tested and approved by Centerforce
  • Made In The USA!
Item #: 53026
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $8.99
Sale: $7.47
Save: 17%
Save: $1.52
Qty:

Description: Quality factory replacement master and slave

INCLUDES: Hudraulic Slave w/Adapter

  • Weighs 2.6 lbs
  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: 601810
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $524.99
Sale: $451.56
Save: 14%
Save: $73.43

Qty:

Description: Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.

INCLUDES: Pilot Bearing

  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: 43001
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $27.99
Sale: $23.60
Save: 16%
Save: $4.39
Qty:

Description: Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.

INCLUDES: Pilot Bearing

  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: 43003
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $16.99
Sale: $13.92
Save: 18%
Save: $3.07
Qty:

Description: Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.

INCLUDES: Pilot Bearing

  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: 43004
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $28.99
Sale: $24.68
Save: 15%
Save: $4.31
Qty:

Description: See product details for more Information.

INCLUDES: 6 Bolts

  • Premium-grade materials for durability and longevity.
  • Coated with a corrosion-resistant finish preventing rust and degradation.
  • Compatible with a wide range of clutches.
  • Manufactured to meet or exceed OEM specifications.
Item #: 33001
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $42.99
Sale: $36.51
Save: 15%
Save: $6.48
Qty:

Description: See product details for more Information.

INCLUDES: 6 Bolts

  • Premium-grade materials for durability and longevity.
  • Coated with a corrosion-resistant finish preventing rust and degradation.
  • Compatible with a wide range of clutches.
  • Manufactured to meet or exceed OEM specifications.
Item #: 33002
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $29.99
Sale: $25.75
Save: 14%
Save: $4.24
Qty:

Description: See product details for more Information.

INCLUDES: 6 Bolts

  • Premium-grade materials for durability and longevity.
  • Coated with a corrosion-resistant finish preventing rust and degradation.
  • Compatible with a wide range of clutches.
  • Manufactured to meet or exceed OEM specifications.
Item #: 33003
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $56.99
Sale: $45.87
Save: 20%
Save: $11.12
Qty:

Description: All Centerforce Flywheels Bolts are provided by ARP providing unparalleled fastener strength and durability.

INCLUDES: Bolts

  • Premium-grade materials for durability and longevity.
  • Coated with a corrosion-resistant finish preventing rust and degradation.
  • Compatible with a wide range of flywheels.
  • Manufactured to meet or exceed OEM specifications.
Item #: 33005
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $58.99
Sale: $47.91
Save: 19%
Save: $11.08
Qty:

Description: Centerforce Replacement Heat Shield / Friction Insert Kit with Bolts

INCLUDES: Heat Shield, Hardware

  • Use with Aluminum Flywheels
  • Incorporates a user-friendly bolt-in design.
  • Simplifies the replacement process:
  • Eliminates the older rivet style design.
  • An increased quantity of bolts.
Item #: 11000HS
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $106.99
Sale: $91.34
Save: 15%
Save: $15.65
Qty:

Description: Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.

INCLUDES: T.O.B.

  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: N1716
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $74.99
Sale: $64.46
Save: 14%
Save: $10.53
Qty:

Description: Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.

INCLUDES: T.O.B.

  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: N1086
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $68.99
Sale: $59.09
Save: 14%
Save: $9.90
Qty:

Description: Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.

INCLUDES: T.O.B.

  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: N1777
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $89.99
Sale: $77.37
Save: 14%
Save: $12.62
Qty:

Description: Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.

INCLUDES: T.O.B.

  • Premium suppliers tested for the best results
  • Factory Design for Easy Installation
Item #: N1402
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $124.99
Sale: $107.47
Save: 14%
Save: $17.52
Qty:

Description: Centerforce ® SFI-certified lightened billet steel flywheels are CNC-machined for precise, no-hassle, bolt on performance.

INCLUDES: Flywheel

  • Weighs 17.05 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Lightened Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
Item #: 600100
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $537.99
Sale: $438.72
Save: 18%
Save: $99.27

Qty:

Description: Centerforce ® SFI-certified lightened billet steel flywheels are CNC-machined for precise, no-hassle, bolt on performance.

INCLUDES: Flywheel, Dowel Pins

  • Weighs 17.85 lbs
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Lightened Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
Item #: 600142
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $499.99
Sale: $430.05
Save: 14%
Save: $69.94

Qty:

Description: Centerforce ® SFI-certified lightened billet steel flywheels are CNC-machined for precise, no-hassle, bolt on performance.

INCLUDES: Flywheel

  • Weighs 20.85 lbs
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Lightened Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
Item #: 600120
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $537.99
Sale: $462.31
Save: 14%
Save: $75.68

Qty:

Description: Centerforce billet aluminum flywheels are made from aircraft-grade billet aluminum which features replaceable heat-treated steel friction surfaces. These lightweight and low inertia flywheels are CNC-machined and SFI-certified.

INCLUDES: Flywheel, Dowel Pins

  • Weighs 13.1 lbs
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Mechanically Retained Starter Ring Gear
  • Replaceable Steel Friction Surface
  • Low Inertia / Light Weight
Item #: 900142
Condition: New
THIS ITEM HAS BEEN SUPERSEEDED BY 901142
Description: Centerforce billet aluminum flywheels are made from aircraft-grade billet aluminum which features replaceable heat-treated steel friction surfaces. These lightweight and low inertia flywheels are CNC-machined and SFI-certified.

INCLUDES: Flywheel, Dowel Pins

  • Weighs 13.25 lbs
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Mechanically Retained Starter Ring Gear
  • Replaceable Steel Friction Surface
  • Low Inertia / Light Weight
Item #: 901142
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $599.99
Sale: $516.08
Save: 14%
Save: $83.91

Qty:

Description: Centerforce billet aluminum flywheels are made from aircraft-grade billet aluminum which features replaceable heat-treated steel friction surfaces. These lightweight and low inertia flywheels are CNC-machined and SFI-certified.

INCLUDES: Flywheel

  • Weighs 13.6 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 23.4 oz Counter Balance
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Mechanically Retained Starter Ring Gear
  • Replaceable Steel Friction Surface
  • Low Inertia / Light Weight
Item #: 900170
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $662.99
Sale: $540.77
Save: 18%
Save: $122.22

Qty:

Description: Centerforce billet aluminum flywheels are made from aircraft-grade billet aluminum which features replaceable heat-treated steel friction surfaces. These lightweight and low inertia flywheels are CNC-machined and SFI-certified.

INCLUDES: Flywheel

  • Weighs 15.6 lbs
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Mechanically Retained Starter Ring Gear
  • Replaceable Steel Friction Surface
  • Low Inertia / Light Weight
Item #: 900120
Condition: New
THIS ITEM HAS BEEN SUPERSEEDED BY 901120

Description: Centerforce billet aluminum flywheels are made from aircraft-grade billet aluminum which features replaceable heat-treated steel friction surfaces. These lightweight and low inertia flywheels are CNC-machined and SFI-certified.

INCLUDES: Flywheel

  • Weighs 16.0 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Mechanically Retained Starter Ring Gear
  • Replaceable Steel Friction Surface
  • Low Inertia / Light Weight
Item #: 900100
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $637.99
Sale: $520.36
Save: 18%
Save: $117.63

Qty:

Description: Centerforce billet aluminum flywheels are made from aircraft-grade billet aluminum which features replaceable heat-treated steel friction surfaces. These lightweight and low inertia flywheels are CNC-machined and SFI-certified.

INCLUDES: Flywheel

  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • Billet Aluminum
  • Mechanically Retained Starter Ring Gear
  • Replaceable Steel Friction Surface
  • Low Inertia / Light Weight
Item #: 901120
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $624.99
Sale: $537.58
Save: 14%
Save: $87.41

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel, Dowel Pins

  • Weighs 23.50 lbs
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
  • Domestic And Import Applications
Item #: 700142
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $499.99
Sale: $430.05
Save: 14%
Save: $69.94

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel

  • Weighs 27.5 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 33 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
  • Domestic And Import Applications
Item #: 754173
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $612.99
Sale: $526.83
Save: 14%
Save: $86.16

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel

  • Weighs 29.0 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 23.4 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
Item #: 700177
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $574.99
Sale: $494.57
Save: 14%
Save: $80.42

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel

  • Weighs 29.0 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 24.4 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
Item #: 700173
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $562.99
Sale: $483.82
Save: 14%
Save: $79.17

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel

  • Weighs 29.3 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
  • Domestic And Import Applications
Item #: 700107
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $699.99
Sale: $602.10
Save: 14%
Save: $97.89

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel

  • Weighs 30.2 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
  • Domestic And Import Applications
Item #: 700100
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $512.99
Sale: $440.81
Save: 14%
Save: $72.18

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel

  • Weighs 31.0 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 23.4 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
Item #: 700170
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $587.99
Sale: $505.32
Save: 14%
Save: $82.67

Qty:

Description: Centerforce ® SFI-certified steel flywheels are CNC-machined from billet steel for precise, no-hassle, bolt-in installation.

INCLUDES: Flywheel

  • Weighs 31.2 lbs
  • 168 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • SFI Spec 1.1 Approved
  • High Quality Billet Steel
  • Cad/cam Designed And Cnc Machined
  • Precision Balanced
  • No-hassle Bolt-in
  • Domestic And Import Applications
Item #: 700120
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $499.99
Sale: $430.05
Save: 14%
Save: $69.94

Qty:

Description: Centerforce nodular iron flywheels are high quality O.E. nodular iron replacements and are not SFI-certified for competition use.

INCLUDES: Flywheel

  • Weighs 16 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 0 oz Counter Balance
  • High Quality Nodular Iron Castings
  • Built As Oe Replacements
Item #: 400100
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $249.99
Sale: $215.00
Save: 14%
Save: $34.99
Qty:

Description: Centerforce nodular iron flywheels are high quality O.E. nodular iron replacements and are not SFI-certified for competition use.

INCLUDES: Flywheel

  • Weighs 17 lbs
  • 153 Tooth R.Gear, 6 Bolt Crank, and 23.4 oz Counter Balance
  • High Quality Nodular Iron Castings
  • Built As Oe Replacements
Item #: 400170
Condition: New
Most items ship in 1 to 5 days but delays can occur. You will be notified if an item cannot be shipped by the next business day!
Price: $249.99
Sale: $215.00
Save: 14%
Save: $34.99
Qty:

Items 61-120 of 160

View Universal items for: Chevrolet, Camaro